These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.
I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research
SSQ-6 silver solder paste is ideal for brass, copper, stainless steel, bronze, cast iron, copper nickel, chrome moly, steel, and german silver in any combination.
In this photo series, SSQ-6 is utlized to solder brass to stainless steel at 1050° F, with a bonding strength of over 80,000 PSI.
Pictured above, the brass and stainless are set in place.
SSQ-6 is easy to use, simply push the plunger to administer the paste-- either sandwich the product between the metal pieces, or lay the material into the joint as pictured.
After removing the flux residue, SSQ-6 forms a porosity-free aesthetically pleasing silver solder joint.
The backside of the brass and stainless steel solder looks as uniform as the front--just one of the reasons the SSQ-6 is quickly becoming a customer favorite.