These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.
I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research
SSQ-6 is the perfect solution for jobs like this--parts are balancing, and if a rod were used they could easily be knocked over. SSQ-6 silver solder paste almost glues them together and acts like a jig when heated.
Watch the metal turn to a dull red then apply the paste for a perfect joint every time.
Works great on "just cleaned" stainless, brass, copper, steel, bronze and even cast iron.
Notice how much is applied to the rings, a little is good for this joint more will waste product.
Only apply paste to cooled metals
SSQ-6 works with any torch, propane, MAPP gas, oxyacetylene