These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.
I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research
In this application a 1/8" steel plate is soldered to a copper end cap using Muggy Weld SSQ-6 56% silver solder paste.
Always clean both the copper and the steel well before starting the brazing process. Copper to steel pipes have often needed to be joined but the average handyman has had problems in the past soldering these two. SSQ-6 paste is easily applied with a syringe on cold metals.