These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.
I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research
Demonstrates the heat absorption qualities of cool blue heat paste. Tami holds a piece of steel 1 inch from where the base metal is approximately 1500oF, with about 1 oz. of COOL BLUE heat paste applied.
This material eliminates warpage in auto body and auto collision applications as well as protecting heat sensitive materials such as rubber, chrome, plastic, paint, wood, previous solders, glass and more.
WARNING: Do not try this demonstration anywhere, for any reason
Always allow your part to cool completely before removing the COOL BLUE for your safety and the safety of your part.
Keep the COOL BLUE as clean as you can to ensure long life of the product
Remember to add water to the paste from time to time and always keep moist for best results.
All natural Cool Blue stops heat transfer up to 3000°F Putty-like material protects heat ..