Welcome visitor you can login or create an account.

Currency: US Dollar

MuggyWeld LLC

0 item(s) - $0.00

Your shopping cart is empty!

Silver Soldering Cast Iron Tractor Parts

Testimonials

Mike,

These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.

 

aluminum welding and metal repair

I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.

 

metal fabrication and repair with muggyweld

Thank you,

 

David Hipskind
Turbomachinery Technician
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research

 

Stay Connected

facebook

twitter

watch our metal repair videos on youtube

Michael Richardson needed to save his John Deere JD450 Dozer, tractor - skidder--the 3/4 inch bolt had worn the cast iron bellhousing bolt holes out over time. Michael said aftermarket parts are not available for this machine and if they could not repair these cast pieces, they would have to junk the tractor which would have been a shame as the machine otherwise worked excellent. He drilled out the holes, placed a cold rolled steel insert into cast and brazed the two parts with MuggyWeld SSF-6 Silver Solder.

 

The 3/4 inch bolts will work against the softer cast after years and the result will be an oblong or larger hole, at this point there is no way to truly tighten the bolt sufficiently.

 

As you can see, they started tearing the John Deere down to prepare for the brazing process.

 


The 250 lb cast bellhousing is ready to be drilled for the steel inserts.

 

 

Michael is half-finished repairing the first insert with SSF-6.

 

The SSF-6 flowed out nice and is very strong at over 70,000 PSI.

 

 

All four bolt holes with inserts brazed on all sides to perfection.

 

 

Another John Deere JD450 saved with MUGGYWELD SSF-6 Silver Solder!

 

Michael just ordered more SSF-6 for his next project, he is now working on the cross member on the same tractor. Thank you Michael for sharing your project photos!

 

SSF-6 Silver Solder Products

Show:
Sort By:
SSF-6 Sample Pack
SSF-6 Sample Pack

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Starter Kit
SSF-6 Starter Kit

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Full Kit
SSF-6 Full Kit

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Pound
SSF-6 Pound

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Replacement Flux
SSF-6 Replacement Flux

1 container Powder Flux (shelf life 2 years) ..