Welcome visitor you can login or create an account.

Currency: US Dollar

MuggyWeld LLC

0 item(s) - $0.00

Your shopping cart is empty!

Cast Iron Carburetor Repair with Silver Solder

Testimonials

Mike,

These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.

 

aluminum welding and metal repair

I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.

 

metal fabrication and repair with muggyweld

Thank you,

 

David Hipskind
Turbomachinery Technician
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research

 

Stay Connected

facebook

twitter

watch our metal repair videos on youtube

Please observe proper AWS safety guidelines

En Espanol

Customer Testimonial:

 

Dear Mike;

 

I just wanted to tell you about a repair that I made that I probably never would have even attempted without your SSF-6 Silver Solder. I have attached some before and after photos.

 

My customer sent me a cast iron body carburetor to repair that had a piece broken out of the casting at the threaded hole where the inlet fitting screws into. It was a 1/8 NPT fitting, and someone had just tightened it too much and broke the casting. The broken piece was long gone. Someone had previously tried fixing it with epoxy, but it had ultimately failed.

 

I clamped the casting into a large vise to act as a heat sink, and using a #3 torch tip, built up the area with SSF-6. After cooling for about 2 minutes, I carefully unscrewed the bolt. It had left almost a perfect set of threads in the SSF-6.

 

Show:
Sort By:
SSF-6 Sample Pack
SSF-6 Sample Pack

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Starter Kit
SSF-6 Starter Kit

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Full Kit
SSF-6 Full Kit

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Pound
SSF-6 Pound

Our flux coated SSF-6 silver solder flows like no other, is easier to use than flux-less rods, and w..

SSF-6 Replacement Flux
SSF-6 Replacement Flux

1 container Powder Flux (shelf life 2 years) ..