Welcome visitor you can login or create an account.

Currency: US Dollar

MuggyWeld LLC

0 item(s) - $0.00

Your shopping cart is empty!

SUPER ALLOY 5

Testimonials

Mike,

These pics come from a new aerospace test facility that they are constructing at the University of Notre Dame. The SSF-6 is working great.

 

aluminum welding and metal repair

I am attempting to make all of these fittings air tight as they are used for pressure measurements. We can¹t have any leaks. I had very little warpage of my base metal and I think this is really going to work out very well.

 

metal fabrication and repair with muggyweld

Thank you,

 

David Hipskind
Turbomachinery Technician
The University of Notre Dame
Institute for Flow Physics and Control (FLOWPAC)
The Hessert Laboratory for Aerospace Research

 

Stay Connected

facebook

twitter

watch our metal repair videos on youtube

The 600º Aluminum Weld

Super Alloy 5 
 

  • Flows like silver solder on thin aluminum
  • Bonds at half the melting point of aluminum
  • Creates a malleable bond that is stronger than the parent metal
  • Works with any heat source: propane, natural gas, oxy-acetylene, MAPP gas.
  • Makes an excellent TIG rod
  • Filler rod bonds right through paint, oil, grease, dirt etc.
  • Matching flux not only cleans the work area, but also serves as an absolute temperature guide

 

  • Can be machined, drilled, tapped, threaded, plated, anodized or even bent without causing pinholes or porosity

 

 

Aluminum dissipates heat very quickly, therefore, oxyacetylene is required for all thick aluminum or large masses of aluminum.

 

Attributes Super Alloy 5
Melting temperature 600° F
Bonding strength 30,000 PSI
Sizes available 3/32", 1/16"
Flux Powder, 1 year shelf life
Recommended torch Propane, MAPP, oxyacetylene
Metal warpage Potential
Can weld thick aluminum? Yes with oxyacetylene
Can join aluminum to other metals? No
Can repair cast aluminum? Yes with oxyacetalene
Can be used with TIG? Yes
All position? Yes
Can be plated? Yes
Can be polished? Excellent
Takes powder coating? Excellent
Pre-cleaning necessary? No
Can be anodized? Yes
Can be used with a soldering iron? No
Can repair aluminum boats? Yes with oxyacetylene

 

 

Show:
Sort By:
Super Alloy 5 Starter Kit 1/16"
Super Alloy 5 Starter Kit 1/16"

Super Alloy 5 is the 600°F aluminum brazing alloy--bonds at half the melting point of aluminum ..

Super Alloy 5 Starter Kit 3/32"
Super Alloy 5 Starter Kit 3/32"

Super Alloy 5 is the 600°F aluminum brazing alloy - bonds at half the melting point of aluminum ..

Super Alloy 5 Full Kit 1/16"
Super Alloy 5 Full Kit 1/16"

Super Alloy 5 is the 600°F aluminum brazing alloy--bonds at half the melting point of aluminum ..

Super Alloy 5 Full Kit 3/32"
Super Alloy 5 Full Kit 3/32"

Super Alloy 5 is the 600°F aluminum brazing alloy--bonds at half the melting point of aluminum ..

Super Alloy 5 Replacement Flux
Super Alloy 5 Replacement Flux

1 container powder flux (shelf life 1 year) ..

Combo 2
Combo 2

FORTY rods 3/32" diameter Super Alloy 5 rods 4 jars powder flux SEVEN FREE rods Super Alloy 5..